Designed specifically for industrial High Bay lighting applications, this lighting solution is engineered for reliable, continuous operation in demanding industrial environments. Its robust driver design minimizes failure points and reduces maintenance requirements while providing stable performance under challenging electrical conditions.
- Reliable Industrial Operation: Designed for continuous operation and dependable performance in demanding industrial environments.
- Wide Voltage Operation: Operates reliably even at system voltages up to 270V.
- 4kV Surge Protection: Built-in capability to withstand surges up to 4kV, reducing the need for an additional SPD, subject to the overall electrical system design.
- Reliable Earthing Performance: Designed to maintain reliable operation even under poor earthing conditions.
- Operation Without Earth Connection: The system can operate without an earth connection where permitted by the applicable installation and electrical safety requirements.
- Swinging Neutral Tolerance: Designed to operate reliably even under fluctuating or swinging neutral conditions.
- Controlled LED Current: LEDs are operated at the nominal current specified by the LED manufacturer, supporting consistent performance and long LED life.
- IS 16104 Compliance: Current regulation is designed in accordance with the requirements specified under IS 16104, Clause 7.2.
- High-Efficacy LED Technology: Supports high-efficiency LEDs with luminous efficacy of up to 140 lm/W, combined with premium-quality lenses for effective light distribution.
```
```
LED Flood Light Technical Specifications
Performance, electrical and environmental specifications
| Specification | Details |
|---|---|
| Input Supply | 140–270 VAC, 47–53 Hz |
| High Voltage Test | 440 VAC for 30 Sec |
| Power Factor | > 0.95 |
| THD | < 10% |
| Surge Protection | Up to 4 KV No additional SPD required |
| LED Used | OSRAM |
| LED Luminous Efficiency | 140 lm/W at Ti = 85°C |
| Beam Angle | 120° |
| Lens Used | Suitable for Continuous Industrial Use |
| Lens Material | PMMA |
| System Efficiency | > 85 lm/W |
| LED Operating Current | Well within limits specified by LED Manufacturer |
| Estimated LED Life | > 50,000 Hrs |
| CRI | > 70 |
| CCT | 5000–5700 K |
| Degree of Protection | IP65 |
| Operating Temperature | -10°C to 50°C |
| Humidity | Up to 95% RH, Non-Condensing |